All Sections
Sustainable Site Planning Strategy
Zero Carbon Design Strategy
Building Materials Strategy
Zero Carbon Design Strategy
Passive Design
High Performance Glazing
A fritted pattern has been applied to northwest- and southeast-facing glazing at selected areas to vary the opacity, reflecting the direct sun and diffusing the daylight, which further reduces heat gain and glare.
Low-emissivity Insulated Glazed Unit with low thermal transmittance value, low shading coefficient, and relatively high Visual Light Transmittance.
Change View
Take the Quiz
Disclaimer of ECF/ECC-funded Projects
Any opinions, findings, conclusions or recommendations expressed in this material/event do not necessarily reflect the views of the Government of the Hong Kong Special Administrative Region, the Environment and Conservation Fund and the Environmental Campaign Committee.
What is ZCB?
ZCB is the first Zero Carbon Building in Hong Kong with energy plus status and net zero carbon emissions on an annual basis. It was developed by the Construction Industry Council to showcase state-of-the-art low carbon building design and technologies to the industry locally and internationally, and to raise community awareness of low carbon living in Hong Kong.
In recent years, environmental problems like global warming and resource scarcity have become important issues and energy conservation plays an important role in alleviating these problems. Through integrated passive building design and energy efficient active systems, ZCB minimizes energy consumption and demonstrates the balance between nature and the built environment.
ZCB also generates on-site renewable energy from photovoltaic panels and a tri-generation system using biofuel made of waste cooking oil to meet its energy consumption needs.. Beyond this, ZCB exports surplus energy to offset the embodied carbon from its construction process and major structural materials. ZCB is the blueprint for promoting the adoption of low carbon design strategies and technologies for future buildings.
Sensors
Sensors for internal temperature, CO2, wind movement and humidity collect relevant environmental data for the Building Management System that controls the dampers. Manual control mode is also allowed.